Jump to content

  2. →
  3. →


Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

Used Oil Re-refining

Started by zarksh, Dec 18 2005 01:42 AM

This topic has been archived. This means that you cannot reply to this topic.
2 replies to this topic
Share this topic:
| More

#1 zarksh

zarksh

    Brand New Member

  • Members
  • 1 posts

Posted 18 December 2005 - 01:42 AM

Good morning,
I was interested in reading some articles in your forum, so, I decided to ask you that. I want a company (preferred in Asia) to fabricate a small process plant for Used Oil Lubes re-refining, of acid and alkaline free but of a total evaporation clay treatment system, with production capacity of 10,000 tons per year. Also if any one interested in that I want to employ senior petroleum engineer and other helper engineers in my project which will be located in Saudia Arabia. I hope you can at least lead me to the direct side to ask.

My E-mail: zarksh@yahoo.ca

Thanks in advance

#2 Guest_Kalle Kenton_*

Guest_Kalle Kenton_*
  • guestGuests

Posted 11 April 2006 - 11:01 AM

QUOTE (zarksh @ Dec 18 2005, 01:42 AM) <{POST_SNAPBACK}>
Good morning,
I was interested in reading some articles in your forum, so, I decided to ask you that. I want a company (preferred in Asia) to fabricate a small process plant for Used Oil Lubes re-refining, of acid and alkaline free but of a total evaporation clay treatment system, with production capacity of 10,000 tons per year. Also if any one interested in that I want to employ senior petroleum engineer and other helper engineers in my project which will be located in Saudia Arabia. I hope you can at least lead me to the direct side to ask.

My E-mail: zarksh@yahoo.ca

Thanks in advance

#3 Guest_darshanjindal_*

Guest_darshanjindal_*
  • guestGuests

Posted 01 May 2006 - 10:41 AM

Dear Sir,

Please contact me on my email ID darshanjindal@gmail.com if you are interested in rerefinin of used lubricating oil .

Thanks and Regards,

darshan



QUOTE (zarksh @ Dec 18 2005, 01:42 AM) <{POST_SNAPBACK}>
Good morning,
I was interested in reading some articles in your forum, so, I decided to ask you that. I want a company (preferred in Asia) to fabricate a small process plant for Used Oil Lubes re-refining, of acid and alkaline free but of a total evaporation clay treatment system, with production capacity of 10,000 tons per year. Also if any one interested in that I want to employ senior petroleum engineer and other helper engineers in my project which will be located in Saudia Arabia. I hope you can at least lead me to the direct side to ask.

My E-mail: zarksh@yahoo.ca

Thanks in advance

Back to Industrial Professionals

Similar Topics




  1. Cheresources.com Community
  2. → General Chemical Engineering Forum
  3. → Industrial Professionals
  4. Guidelines / Rules for Posting